• This email address is being protected from spambots. You need JavaScript enabled to view it.
  • +254-716-200200

Powerlink Non-Pressurized Solar Water Heater

CHARACTERISTICS:

The Powerlink Non-Pressurized Solar Water Heater uses the all glass evacuated solar collector tubes as the heat-absorbing element. The high vacuum degree of the clearance between the outer and inner tube reduces the heat emission which is caused by convection and conduction. The layer films (coating) of the all glass evacuated tubes transfer the sun energy into heat energy. The high absorption and low emittance rate of  the Heaters is unique. Depending on the different density between hot water and cold water, a water flowing cycle is created in the tube. Hot water flows automatically upwards while the cold water flows downward. The water in the storage tank will be heated from this natural circulation.

KEY SPECIFICATION:

• Inner tank: stainless steel SUS304-0.5mm
• Vacuum tube: AL-N/AL/58-1800
• Outer tank: Galvanized steel-0.4mm
• Frame: galvanized steel-1.5mm
• Insulation: Polyurethane
• Reflector: aluminum

REMARK:

• Solar heat storage tank diameter (mm): 360/460   
• Thickness, insulated(mm):50
• Vent connection(inch):3/4
• Electric heater connection(inch):1
• Water connection(inch):3/4
• Collector angle(degree):20/45